CAVITRON MODEL 1025

CONTINUOUS HIGH ENERGY DISPERSER

Wetted parts Type 316 S/S chamber tools system with rotor ring and stator ring intermeshing. Outer rotor with 1.5 mm. dia. chamber/outer stator with 1.5 mm chambers propagate 150 psig. pressurization/cavitational sequences over 500 thousand times per second. 

1-1/2" 150# flange inlet and 1-1/2" flange outlet.

Double mechanical seal with viton o-rings on shaft for operation to 150 psig at 280 deg. F.

Ball bearing mounted shaft, 2 angular, 1 cylindrical in cast iron bearing housing oil lubricated.

Belt driven at 7200 RPM by 30 HP, 3600 RPM motor. For use on 3/60/230 or 460 volt service. Starter omitted. 304 S/S base.

                                                                                                                                                                                                                                                                                     Price Ea: $69,204.00

Additional for mechanical seal cooling and pressurization system

with explosion proof electricals. Includes recirculation pump,

heat exchanger, reservoir, pressure gauges, back pressure valve, pressure

switch and flow switch preventing grinder operation unless system is on.                      $7,978.00

Additional for installed double mechanical seal cooling and pressurization

system including recirculation pump, heat exchanger, reservoir,

back pressure gauge, back pressure valve, pressure switch and flow switch.

Unit is installed on portable push dolly with 1025 Cavitron and 40 HP

motor starter (specify voltage). All necessary interconnecting

hydraulic tubing between seal system and seal is installed. Wiring

between motor starter, flow switch, pressure switch and Cavitron is provided

(8-10 week delivery).                                                                                                    $13,201.00

Terms: 30% down payment with order, balance Net 30 days.

FOB: Carlstadt,New Jersey   Quote valid for 30 days

Shipment: 12 weeks following receipt of order down payment. 

If expedited shipment is required, please consult factory.

Subject to terms and conditions.

                                                                                               ______________________

                                                                                                      Roy R. Scott

                                                                                                      Sales Engr. Manager