ARDE DICON INLINE DISPERSING GRINDER
MODEL 2 X 1 LABORATORY SYSTEM
Wetted parts Type 316 stainless steel. Toothed impeller and liner.
2" diameter conical inlet flange with quick release clamp to 12 liter cone bottom jacketed recirculation tank, suitable for vacuum. 1" diameter sanitary ferrule outlet with quick release clamps to three-way valve to recirculation manifold or discharge. Sanitary ferrule joint gaskets Viton. No. 4 finish minimum on all stainless steel surface.
Double mechanical seal with Viton o-rings on shaft.
V-belt pulley drive system for 1750, 3500 and 7000 RPM impeller speed with 3 HP 3/60/230-460V service, NEMA Type 12 starter. Stainless steel base, No. 4 polish minimum.
Weight: 295 pounds gross, 175 net.
Discharge grid supplied: 1/8"
PRICE EA: $28,292.00
Deduct for horizontal in-line unit with 2" inlet 1" outlet. ($10,377.00)
Additional for mechanical seal cooling and pressurization
system with explosion proof electricals. Includes
recirculation pump, heat exchanger, reservoir, pressure
gauges, back pressure valve and pressure/flow switch preventing grinder
operation unless system is on. $7,978.00
Additional for installed double mechanical seal cooling and pressurization
system including recirculation pump, heat exchanger, reservoir,
back pressure gauge, back pressure valve, pressure switch and flow switch.
Unit is installed on portable push dolly with 3 x 1.5 Dicon and 7.5 HP
motor starter (specify voltage). All necessary interconnecting
hydraulic tubing between seal system and seal is installed. Wiring
between motor starter for Dicon and flow switch/pressure switch is provided.
All controls and switches are installed in NEMA 4X enclosure (not explosion proof)
(8-10 week delivery). $13,211.00
Terms: Net 30% down
FOB: Carlstadt, New Jersey Quote valid for 30 days
Shipment: 6-8 weeks following receipt of down payment.
If expedited shipment is required, please consult factory.
Shortened delivery can often be arranged.
Click Here to view Brochure